DINITROL 9100 is a one component cold-applied polyurethane adhesive designed for the directglazing of automotive glasses. The properties of the adhesive DINITROL 9100 are the following:
• good adhesion on paints
• fast curing
• high modulus
• low odour
• excellent working characteristics
• low conductive
• high elasticity
• solvent and PVC free
• works at all vehicles
• works at ambient temperatures from -18°C to 45°C
• OEM approved
• Crash test approved acc. FMVSS 212
• ageing and weather resistant

Together with the corresponding pre-treatments the adhesive DINITROL 9100 is designed for the use in replacing polyurethane direct-glazed automotive glass parts and other bondings in vehicle manufacturing. The adhesive’s high modulus property contributes remarkably to the stiffening increase of the car body. DINITROL 9100 is a low conductive adhesive which enhances contact corrosion between the adhesive and the car body.

DINITROL 501 FC-HM SQ is a one component, moisture curing polyurethane adhesive with the following properties:
• good adhesion on paints
• low odour
• excellent working characteristics
• very good standing properties
• high modulus
• short cut-off string
• solvent and PVC free
• OEM approved
• ageing and weather resistant
• less particles

Together with the corresponding pre-treatments DINITROL 501 FC-HM SQ is particularly suited to bonding applications in the manufacture of trains, busses and trucks. Because of the excellent working characteristics and less particles, DINITROL 501 FC-HM SQ is suited also for very good gap fillings. The adhesive’s high modulus property contributes remarkably to the stiffening increase of the construction.

Used as surface adhesive for bonding different material surfaces such as rigid PVC , GFK ( grinded), aluminum ( anodized etc. ) , tinted glass, HPL etc. onto different insulating materials like PUR- , PS - foam and mineral wool used . The elastic joint has a good weather resistance and is paintable in the cured state . The particularly long open time provides an adequate processing window even with geometrically difficult or large components .

For surface bonding of PVC hard , pre-treated aluminum , stainless steel , glass fiber reinforced plastics and various design to be used insulating materials . Suitable et al for surface bonding of HPL ( as FunderMax ) . It does not drip off , and has a high durability with good spreadability . In highly absorbent substrates, such as mineral substrates , silicate plates or similar , strikes or he does not penetrate away .

Fast , universal mounting adhesive for reliable and durable connections in the building trade and in industrial applications . Excellent adhesion on different wood- and construction materials, ceramics , metals , thermosets and thermoplastics . Swells (foams ) slightly during the setting up and is in the cured state grinded and varnished .

▪ Window and door construction.
▪ Board joint bonding of cassettes in the wood, window and front door area.
▪ Stair construction and building trade.
▪ With many assembly bonding processes.
▪ With laying of skirting and laminate.
▪ Fixation of struts for double floorings.
▪ Diverse industrial fields.

DINITROL 501 FC-HM SQ is a one component, moisture curing polyurethane adhesive with the
following properties:
• good adhesion on paints
• low odour
• excellent working characteristics
• very good standing properties
• high modulus
• short cut-off string
• solvent and PVC free
• OEM approved
• ageing and weather resistant
• less particles
Together with the corresponding pre-treatments DINITROL 501 FC-HM SQ is particularly suited to
bonding applications in the manufacture of trains, busses and trucks. Because of the excellent
working characteristics and less particles, DINITROL 501 FC-HM SQ is suited also for very good
gap fillings. The adhesive’s high modulus property contributes remarkably to the stiffening increase
of the construction.

DINITROL 512 2K HM is a two component polyurethane based sealant and adhesive with the
following properties:
• good adhesion on paints
• short pot life
• low odour
• good working characteristics
• low conductive
• high modulus
• ageing and weather resistant
The 2K adhesive DINITROL 512 2K HM is designed for the direct glazing repair market where a fast safe drive away time is required. In contrast to the usually used 1 component sealants reaction of this product is independent of air humidity. The high modulus of this product has an strong influence on stiffening contribution of the sealant on the car body. This product is designed as an electric low conductive sealant. It covers all requirements regarding antenna performance and potential contact corrosion in combination with aluminium car bodies.

DINITROL 515 A/B is an adhesive system consisting of the moisture curing adhesive. DINITROL 515 A and the accelerating paste DINITROL 515 B with the following properties:
• good adhesion on paints
• less particles
• low odour
• excellent working characteristics
• very good standing properties
• high elasticity
• solvent and PVC free
• OEM approved
• ageing and weather resistant
Together with the corresponding pre-treatments DINITROL 515 A/B is particularly suited to bonding applications in the manufacture of trains, busses and trucks. Because of the excellent working characteristics and less particles, DINITROL 515 A/B is suited also for very good gap fillings.
DINITROL 515 A is a polyurethane based adhesive which will cure also without the accelerating paste with ambient humidity to an elastic and aging resistant adhesive / sealant with the well known mechanical properties. To facilitate a curing which will not depend on the ambient humidity and the geometric design of the bonding the accelerating paste DINITROL 515 B was developed. Both products are adjusted to each other and the curing process will proceed simultaneously all over the bonding area. This is in contrast to one component adhesives where curing is governed by surface depending moisture access and diffusion controlled curing progress. This makes it possible to remove all kinds of fixation devices several hours after the adhesive application and the bonded parts can be transferred to other working procedures.

DINITROL 517 A/B is a 2-component high stability polyurethane adhesive suited especially for structural gluing. DINITROL 517 A/B has a pot life of approx. 12 minutes.
The pot life is easy to change to achieve application times from 5 minutes to 1 hour. Curing may be accelerated by heating, as required.

DINITROL 600 is an elastic, moisture-curing 1-component sealing and bonding compound for primed and lacquered metals, aluminium, wood materials and duroplastics. DINITROL 600 is resistant to humidity and weather conditions, to temperatures from - 40°C to + 90°C (short-term to + 120°C), demonstrates good adherence and can be coated once dry.

DINITROL F 500 LP is a one component, moisture curing polyurethane adhesive with the following properties:
• good adhesion on paints
• low odour
• excellent working characteristics
• very good standing properties
• high elasticity
• solvent and PVC free
• ageing and weather resistant
• less particles

Together with the corresponding pre-treatments DINITROL F 500 LP is particularly suited to bonding applications in the manufacture of trains, busses and trucks. Because of the excellent working characteristics and less particles, DINITROL F 500 LP is suited also for very good gap fillings.

DINITROL 500 1K is a humidity-curing and one component polyurethane for the direct-glazing of automotive glasses. The adhesive DINITROL 500 1K includes the following properties:
• good adhesion on paints
• low odour
• excellent working characteristics
• very good standing properties
• short cut-off string
• high elasticity
• solvent and PVC free
• OEM approved
• ageing and weather resistant

Together with the corresponding pre-treatments as for example primers and/or activators, DINITROL 500 1K is designed for the use in replacing polyurethane direct-glazed automotive glass parts and other bondings in vehicle manufacturing.

DINITROL PVC PA 283 O2 is a over-paintable PVC-Epoxy-Blend Plastisol (solvent-free) for medium solid metal adhesion (e.g. outside / frame at bonnet and trunk lid).
A pregelling at 160°C is recommended for EC-Wash resistance. The material is approved according the OPEL specification L000 0406.

DINITROL RA 910 is a cold-applicable, thermo-setting product based on unsaturated, synthetic rubbers. It is suitable for use as a lining adhesive, sealing agent and spot weld paste. It is ideal for use in vehicle shell construction where the bodywork or its components are processed without gelation in degreasing and phosphatisation systems with subsequent EC dipping. The product is hardened in an EC oven. DINITROL RA 910 displays good adhesion qualities on oiled sheet steel and various zinc-coated sheets.

The glass activator DINITROL 520 is a solvent containing adhesion promoting formulation which is used in combination with the DINOL glass primer for the direct glazing in the automotive industry. In combination with the multiprimer DINITROL 550, the activator DINITROL 520 improves the adhesion on several metals and plastics. Test with actual substrates and conditions have to be preformed to ensure adhesion and material compatibility. Trials by the supplier are recommended. Product benefits are:
• Pre-treatment on glasses
• Pre-treatment on metals and plastics
• Cleaning agent of the bonding areas

DINITROL 530 is a primer designed as a pre-treatment in replacing polyurethane direct-glazed automotive glass parts and other substrates.
DINITROL 530 is a solvent containing, physically and chemically drying black primer which promotes the adhesion between the glass (in combination with the activator DINITROL 520) and paint and the direct glazing adhesive and acts as a UV protection. DINITROL 530 combines the following functions:
• Pre-treatment on glass and paint
• inhibits rust in small nicks and scratches
• compatible with all DINOL adhesive systems

DINITROL 538 plus is a primer designed as a pre-treatment in replacing polyurethane direct-glazed automotive glass parts and other substrates.
DINITROL 538 plus is a solvent containing, physically and chemical drying black primer which promotes the adhesion between the glass / paint surface and the direct glazing adhesive and acts as a UV protection. DINITROL 538 plus combines the following functions in one product:
• one-step glass-frit primer
• RIM and pinch weld primer
• long life primer (no reaction within 3 month)
• inhibits rust in small nicks and scratches
• compatible with all DINOL adhesive systems

DINITROL 540 is a solvent based, physical, reactive drying colourless activator for the bonding of plastic part in the automotive industry. DINITROL 540 is mainly designed to promotes the adhesion on the cut face on old polyurethane adhesives and to promote the PU-RIM encapsulated automotive glasses which are bonded with direct glazing system from DINOL:
• Pre-treatment for cut-face on old polyurethane adhesive
• Pre-treatment for PU-RIM

The multiprimer DINITROL 550 is a black solvent based physical, reactive drying primer. The primer is designed as a pre-treatment for several paints but also as a pre-treatment for different metals and for different kinds of plastics. Substrate must be clean, dry and free of oil and grease. In the majority of cases we recommend
to rough the bonding area with a very fine scotch brite. For the further pre-treatment it is a must to apply first the adhesion promoter DINITROL 520, before the application of the black primer DINITROL 550. Test with actual substrates and conditions have to be preformed to ensure adhesion and material compatibility. Trials by the supplier are recommended.
The product benefits are:
• Pre-treatment on different paints
• Adhesion promoter on diff. metals and plastics
• Applicable with all PUR adhesives from DINOL
• Corrosion protection on smaller scratches

The black primer DINITROL 552 is a solvent based, physical, reactiv drying primer. The primer is designed as a pre-treatment mainly for PMMA but also as a pre-treatment for polycarbonate glasses. Substrate must be clean, dry and free of oil and grease. We recommend to apply the primer directly after the removal of the protective foil. Test with actual substrates and conditions have to be preformed to ensure adhesion and material compatibility. Trials by the supplier are recommended. The product benefits are:
• Pre-treatment on different paints
• Adhesion promoter on diff. metals and plastics
• Applicable with all PUR adhesives from DINOL

DINITROL 560 is a solvent based, physical, reactive drying colourless activator for the bonding of plastic parts in the automotive industry. DINITROL 560 is mainly designed to promote the adhesion of PVC-RIM encapsulated automotive glasses which are bonded with direct glazing system from DINOL:
• Pre-treatment for PVC-RIM

DINITROL 582 is a transparent and fast-drying cleaning agent for heavily soiled surfaces and where conventional cleaning agents are not sufficient to remove tough contaminations and/or residues. DINITROL 582 is an ideal cleaning agent for the removal of dirty surfaces on glasses, ceramic layers, paints, metals but also for plastics.
Nevertheless, the compatibility should be tested before use on plastics and other critical surfaces.

Adhesive cleaner to use only in use with Dinitrol 538 one-step primer . For pretreatment of car windows , for direct glazing with Dinitrol PURScheibenklebern and for cleaning of parts to be bonded .

Very suitable for car , household and industry. Good adhesion to metal, glass , plastic and rubber. Leaves no adhesive residue when used up to 80 ° C ( short term up to 110 ° C ) Solvent Resistance .

Double-sided adhesive , closed-cell polyethylene foam , V. A. for powder coatings .

Double-sided adhesive , closed-cell polyethylene foam , density 100 kg / m3 . With an aging resistant , adhesive strength acrylic adhesive ; also suitable for outdoor use . For fixing of moldings and emblems on cars , for the installation of interior and exterior parts and an assembly aid .

Very thin , blue vinyl tape for critical applications such as sharp edges , over rivets and body seams . Also suitable for covering of protective strips of rubber , no adhesive residue .

Very strong , universal , high-quality reinforcement tape with high adhesive strength . Easily removable, waterproof. For indoor and outdoor.

Aging resistant , permanently plastic , solvent free sealing tape . Is used, when parts are mechanically interconnected , e.g. by screws or rivets. Headlights and taillights can be sealed with the sealing tape when inserted into the vehicle .